Finally! Our 4 inch 101,6mm exhaust system is available! Ordes can be placed.Finally! Our 4 inch 101,6mm exhaust system is available! Ordes can be placed.
Product description:
Our milled chamber intake manifold for the 2.5 TFSI replaces the standard gap intake manifold. Gap intake manifolds are very efficient up to a certain power or boost pressure, as all cylinders are filled evenly. If boost pressures of 2 bar or more are used, we achieve significant increases in performance with our gap intake manifolds. Even with a level 3 with TC870XT, or TC900XT and similar turbochargers that produce over 2 bar, at 660hp there is already an increase of 30hp just by replacing the intake manifold. Stage 4 cars with a reinforced engine and a proportion of alcohol in the fuel, the intake manifold already achieves increases in the range of up to 50 hp. Not only does the peak power increase, the entire filling across the entire speed range is improved, which means the torque increases constantly. Please also note our performance diagrams in the product description.
Please note:In accordance with our general terms and conditions, we
would like to expressly point out again here that all items that are not
expressly marked with a TÜV / EC approval do not have approval in the area of the StVO. These items must
therefore be typed individually by the user before they are used on public
roads. Otherwise, these products must be used in racing.
Product description:
The
HPerformance 125mm 5" intake system is one of the biggest intakes on
the market. It comes with a 100mm 4"oversize- turboinlet, that is
adapted with a silicone reducer to the intake pipe itself. The 125mm 5"
intake kit gains visible power over an 100mm 4" intake system and should
be used in any car above 800HP / 750WHP. The system has a well designed
holder bracket to prevent any touching in the engine bay. By using
aluminium it has a great heat exchange and ist very light. It has no
negative side / risk affects than carbon systems do in terms of melting,
fading / bleaching and Deformation. Due to the material, aluminium has an excellent cooling effect and air temp exchange effect.
Please Note:
Any of our items are not deisgned for beeing used street legal.
Products that are street legal are marked as such.
The offered items are for racing application only and must be installed by professional workshops with
corresponding know how. If you want to install the parts on your own,
please inform yourself up front, if you are able to handle the
installation. You can also ask our technicans on the phone. We cannot
take back items that have been incorrectly installed.
Product
description:
This package contains the RACE SERIES intercooler, the 5 inch 125mm open intake system and the 3,14 inch 80mm charge pipe and billet throttle body elbow. The intake system improves the flow on the cold side of the turbo (intake side) and the intercooler does a significant drop in charge air temperature. On the 3,14 inch 80mm outlet side of the intercooler, the charge pipe and throttle body continue this huge diameter up to the inlet manifold. Vehicles, that run more than 2 bar / 29 psi over time doe benefit significant by the pressure drop improvement due to the big size of the outlet and charge pipe of the intercooler. Also, the stock electrical blow off is not designed for these boost / power levels. This is why we add a mechanical TIAL / TURBOSMART blow off valve that also generates a pleasant blow off sound when releasing the gas pedal.The kit does not only means a significant improvement in the intake air temperature,
but also the improved fresh air supply through the intake in conjunction with
the associated turbo inlet. The intercooler's cooling performance is
dimensioned so that it can cool every conceivable performance on the 2.5 TFSI
up to 1100HP without hesitation or constantly. The intake is also designed for
outputs of up to 1000HP.
The combination achieves a performance increase of up to 40HP and 90NM (reproducible) on a standard vehicle
For further technical information, please see the
descriptions of the individual items.
Important:Please always have work on vehicles carried out by trained specialist
personnel. Bumpers of modern vehicles have various sensors and controls that
can cause problems if handled improperly. We do not provide any
guarantee/guarantee/advice for improper installations.Please note:In accordance with our general terms and conditions, we would like to
expressly point out again at this point that all items that are not expressly
marked with a TÜV / EC approval do not have approval in the area of the StVO.
These items must therefore be typed individually by the user before they are
used on public roads. Otherwise, these products must be used in racing.
Product
description:
The RACE Series intercooler & 125mm open intake
package not only means a significant improvement in the intake air temperature,
but also the improved fresh air supply through the intake in conjunction with
the associated turbo inlet. The intercooler's cooling performance is
dimensioned so that it can cool every conceivable performance on the 2.5 TFSI
up to 1100HP without hesitation or constantly. The intake is also designed for
outputs of up to 1000HP.
The combination achieves a performance increase of up to
35HP and 80NM (reproducible) on a standard vehicle
For further technical information, please see the
descriptions of the individual items.
Important:Please always have work on vehicles carried out by trained specialist
personnel. Bumpers of modern vehicles have various sensors and controls that
can cause problems if handled improperly. We do not provide any
guarantee/guarantee/advice for improper installations.Please note:In accordance with our general terms and conditions, we would like to
expressly point out again at this point that all items that are not expressly
marked with a TÜV / EC approval do not have approval in the area of the StVO.
These items must therefore be typed individually by the user before they are
used on public roads. Otherwise, these products must be used in racing.
Product
description:
The Sport Series intercooler & 125mm open intake
package not only means a significant improvement in the intake air temperature,
but also the improved fresh air supply through the intake in conjunction with
the associated turbo inlet. The intercooler's cooling performance is
dimensioned so that it can cool every conceivable performance on the 2.5 TFSI
up to 900HP without hesitation or constantly. The intake is also designed for
outputs of up to 1000HP.
The combination achieves a performance increase of up to
30HP and 70NM (reproducible) on a standard vehicle
For further technical information, please see the
descriptions of the individual items.
Important:Please always have work on vehicles carried out by trained specialist
personnel. Bumpers of modern vehicles have various sensors and controls that
can cause problems if handled improperly. We do not provide any
guarantee/guarantee/advice for improper installations.Please note:In accordance with our general terms and conditions, we would like to
expressly point out again at this point that all items that are not expressly
marked with a TÜV / EC approval do not have approval in the area of the StVO.
These items must therefore be typed individually by the user before they are
used on public roads. Otherwise, these products must be used in racing.
Product description:
The
HPerformance 125mm 5" intake system is one of the biggest intakes on
the market. It comes with a 100mm 4"oversize- turboinlet, that is
adapted with a silicone reducer to the intake pipe itself. The 125mm 5"
intake kit gains visible power over an 100mm 4" intake system and should
be used in any car above 800HP / 750WHP. The system has a well designed
holder bracket to prevent any touching in the engine bay. By using
aluminium it has a great heat exchange and ist very light. It has no
negative side / risk affects than carbon systems do in terms of melting,
fading / bleaching and Deformation. Due to the material, aluminium has an excellent cooling effect and air temp exchange effect. The "aif baffle" completes this product and improves not only the intake temperatur, it does lift the power up to 8HP and 14N. No more warm air in the filtersystem.
Please Note:
Any of our items are not deisgned for beeing used street legal.
Products that are street legal are marked as such.
The offered items are for racing application only and must be installed by professional workshops with
corresponding know how. If you want to install the parts on your own,
please inform yourself up front, if you are able to handle the
installation. You can also ask our technicans on the phone. We cannot
take back items that have been incorrectly installed.