Product description: Our HPerformance Sport Series intercooler is based on a Gerrett 900 bar and plate design core, which we consistently rate to 700HP for drag racing and 700HP for circuit use. In extensive test series, we tested a wide variety of tube-and-fin and bar-and-plate cores on an 700HP TT-RS DAZA. The main focus was on the reproducibility of the performance. This means that the vehicle can handle thermal stress over a period of time. Our intercooler makes it possible to generate a maximum temperature delta of 9-10°C over several accelerations on the dynamometer. This means that the temperature at the end of the measurement run is no more than 9-10°C above the entry temperature for a vehicle with 800HP. The lower the power, the lower the temperature delta. The intercooler is already recommended for stock performance, because the original intercoolers quickly reach their limits here (everything over 50°C) and temperature-related protective functions take effect. Our intercooler has a parts certificate and can therefore be registered legally (also in combination with other hardware from our company).Please Note: Any of our items are not deisgned for beeing used street legal. Products that are street legal are marked as such. The offered items are for racing application only and must be installed by professional workshops with corresponding know how. If you want to install the parts on your own, please inform yourself up front, if you are able to handle the installation. You can also ask our technicans on the phone. We cannot take back items that have been incorrectly installed.

Product description: Our milled chamber intake manifold for the 2.5 TFSI replaces the standard gap intake manifold. Gap intake manifolds are very efficient up to a certain power or boost pressure, as all cylinders are filled evenly. If boost pressures of 2 bar or more are used, we achieve significant increases in performance with our gap intake manifolds. Even with a level 3 with TC870XT, or TC900XT and similar turbochargers that produce over 2 bar, at 660hp there is already an increase of 30hp just by replacing the intake manifold.  Stage 4 cars with a reinforced engine and a proportion of alcohol in the fuel, the intake manifold already achieves increases in the range of up to 50 hp. Not only does the peak power increase, the entire filling across the entire speed range is improved, which means the torque increases constantly. Please also note our performance diagrams in the product description. Please note:In accordance with our general terms and conditions, we would like to expressly point out again here that all items that are not expressly marked with a TÜV / EC approval do not have approval in the area of ​​the StVO. These items must therefore be typed individually by the user before they are used on public roads. Otherwise, these products must be used in racing.

Product description:  The HPerformance chargocooling package 1 for AUDI RS3 8P MY 2011 is the ultimate cooling and intake upgrade for any power level up to 700HP on your car.  The kit consists of the HP Sport Series intercooler, the 4 inch 100mm open intake system inclusive turboinlet and the new designed air guide / air baffle for the 8P.Especially the first generation 2.5 TFSI cars do not have the capacities in charge cooling and air intake system for any kind of tuning, so our chargecooling package 1 is the ultimate setup for any power level up to sustainable 700HP. Please note:In accordance with our general terms and conditions, we would like to expressly point out again here that all items that are not expressly marked with a TÜV / EC approval do not have approval in the area of ​​the StVO. These items must therefore be typed individually by the user before they are used on public roads. Otherwise, these products must be used in racing.