Product description: AUDI DAZ DNW EVO SPORT - stock pistons - 10,0:1 compression level inclusive ring set and piston pin for rebuilding or tuning application. Please Note: Any of our items are not deisgned for beeing used street legal. Products that are street legal are marked as such. The offered items are for racing application only and must be installed by professional workshops with corresponding know how. If you want to install the parts on your own, please inform yourself up front, if you are able to handle the installation. You can also ask our technicans on the phone. We cannot take back items that have been incorrectly installed.

Product description: The HPerformance billet mashined catch tank is used to prevent you car from spraying oil and oil dust through the DSG ventilation valve into the engine bay. Our billet mashined tank covers that oil and allows the possibility to return into the gearbox. Whenever you do launch control starts or in case you drive high performance levels this is happening during any hard pull. The system is built to resist water from outside to enter the oil circuit. Please Note: Any of our items are not deisgned for beeing used street legal. Products that are street legal are marked as such. The offered items are for racing application only and must be installed by professional workshops with corresponding know how. If you want to install the parts on your own, please inform yourself up front, if you are able to handle the installation. You can also ask our technicans on the phone. We cannot take back items that have been incorrectly installed.

Product description: The HPerformance engine pack 1 is a drop in solution to rebuild your stock engine with stock pistons. That type of engine pack is a long term reliability rebuild to a power level of 800HP. Stock used pistons require no measuring or tolerance setting when rebuilding the engine. After rebuilding the engine, there is no drive in procedure neccessary, the engine is ready for power at the first day. Due to that, there is close to zero risk for any oil consumption after building the engine. Stock pistons are designed for long term use and they offer extreme good cooling technology and produce as little as possible noise, that could be detected als "false knock" by the knock sensors. The rebuild with an engine pack 1 can be done also by standard garage workshops. Please Note: Any of our items are not deisgned for beeing used street legal. Products that are street legal are marked as such. The offered items are for racing application only and must be installed by professional workshops with corresponding know how. If you want to install the parts on your own, please inform yourself up front, if you are able to handle the installation. You can also ask our technicans on the phone. We cannot take back items that have been incorrectly installed.

Product description: The HPerformance engine pack 2 is designed for daily street driving. We advise to combine the engine pack 2 wit classic pump fuels. Engine packs need to be tailored to the car setup. Hybrid turbo builds like TC870XT or TC900XT or full frame setups should be tailored in terms of compression level and fuel to have the maximum best output. The Pistons of our engine packs are custom deisgned by HPerformance regarding tolerances (piston to wall clearance), components (bolts), materials and overall measures and coatings and produced by JE Piston using their best Ultra Series materials. By that we prevent negative aspects like rattle noise, blow by, or wearing that cause engine break downs very quickly. The rods are also designed by HPerformance and have some unique features. The material grade which is often hidden in the web is a major key fact regarding the strength of rods. Our rods have HRC (hardness after rockwell) level 41 and a special 26mm small end design that reduces piston pin bending by stress and handles more power on top. The supertech valve springs help to keep the valves operating even under high RPM and load levels. After various material and stress tests we found out, that the oem head bolts supplyed by AUDI deliever more clamping force than many of the aftermarket bolt Solutions and they dont need to be re-tightened, what bolts need to be. The engine pack Comes furthermore with all gaskets and sealants that are needed to reassemble your engine. That saves a lot of stress and ensures a straight forward buid. Please Note: Any of our items are not deisgned for beeing used street legal. Products that are street legal are marked as such. The offered items are for racing application only and must be installed by professional workshops with corresponding know how. If you want to install the parts on your own, please inform yourself up front, if you are able to handle the installation. You can also ask our technicans on the phone. We cannot take back items that have been incorrectly installed.

Product description: The HPerformance ethanol engine pack is designed to fit any customer demand. Either daily street driving, circuit race driving or quarter mile races, we advise you the best choice. This engine pack can handle all kind of alcohol based fuels as well as methanol content and is designed to handle any power level on the 2.5 TFSI. Engine packs need to be tailored to the car setup. Hybrid turbo builds like TC870XT or TC900XT or full frame setups should be tailored in terms of compression level and fuel to have the maximum best output. The Pistons of our engine packs are custom deisgned by HPerformance regarding tolerances (piston to wall clearance), components (bolts), materials and overall measures and coatings and produced by JE Piston using their best Ultra Series materials. By that we prevent negative aspects like rattle noise, blow by, or wearing that cause engine break downs very quickly. The rods are also designed by HPerformance and have some unique features. The material grade which is often hidden in the web is a major key fact regarding the strength of rods. Our rods have HRC (hardness after rockwell) level 41 and a special 26mm small end design that reduces piston pin bending by stress and handles more power on top. The supertech valve springs help to keep the valves operating even under high RPM and load levels. After various material and stress tests we found out, that the oem head bolts supplyed by AUDI deliever more clamping force than many of the aftermarket bolt Solutions and they dont need to be re-tightened, what bolts need to be. The engine pack Comes furthermore with all gaskets and sealants that are needed to reassemble your engine. That saves a lot of stress and ensures a straight forward buid. Please Note: Any of our items are not deisgned for beeing used street legal. Products that are street legal are marked as such. The offered items are for racing application only and must be installed by professional workshops with corresponding know how. If you want to install the parts on your own, please inform yourself up front, if you are able to handle the installation. You can also ask our technicans on the phone. We cannot take back items that have been incorrectly installed.

Product description: AUDI stock 2.5 TFSI engine block. In case you have seen critical coating damage or you want to build a new engine with ideal tolerances and zero wear, this is the way to start. Please Note: Any of our items are not deisgned for beeing used street legal. Products that are street legal are marked as such. The offered items are for racing application only and must be installed by professional workshops with corresponding know how. If you want to install the parts on your own, please inform yourself up front, if you are able to handle the installation. You can also ask our technicans on the phone. We cannot take back items that have been incorrectly installed.

Product description: The HPerformance X-beam tapered end rod is designed to work with stock 23mm pin pistons of the DAZ DNW TTRS RS3 RS Q3 and VZ5. The rods are shorter than stock rods and have a compression reduction to 9,7:1 which allows performing better with any pump fuel up to 800HP level. They have a hardness level of 41 (HRC) and a 100% product control. Please Note: Any of our items are not deisgned for beeing used street legal. Products that are street legal are marked as such. The offered items are for racing application only and must be installed by professional workshops with corresponding know how. If you want to install the parts on your own, please inform yourself up front, if you are able to handle the installation. You can also ask our technicans on the phone. We cannot take back items that have been incorrectly installed.