Engine version: | RS3 - CZGB |
---|---|
Manufacturer: | HPerformance |
Model: | RS3 8V1 (2015-2016) |
- Fabricated in 1.4301 stainless steel
- 2 x 2,75" / 70mm to 3,5" 90mm
- Tested to handle 900HP (hybrid and fullframe compatible)
- "no drone technology" (middle silencer version)
- Using stock valve control
- ECE homologated street legal
- Deeptone 2.5 TFSI sound
- 1 x 3,5" 90mm catback exhaust system ECE homologated
- 1 x rear silencer section
- 1 x connection pipe
- 1 x middle silencer section ("street" version)
- 5 x exhaust clamps
- 2 x black anodized tailpipes
The HPerformance 3,5" 90mm
downpipe replaces the oringinal factory downpipe. The Factory downpipe
comes with a huge restriction on top, directly after the exhaut gas
outlet of the turbocharger. As soon as the engine is loaded with more
boost, the resulting exhaust gases cannot be handled properly by the
stock downpipe. The temperature increases and the back pressure is
rising due to the growing mass of exhaust gases. The HPerformance TÜV
downpipe replaces the stock front catalysator and has 2 x 400cell
catalysators under the car. This downpipe is street legal and can handle
up to 850HP. We also offer the option to 2 x 200 cell or 2 x 100 cell
as well as a twin decat straight pipe version. Depending on your
countries regulations or your own power expectations you can choose your
prefered style of catalysator. All
of our downpipe solutions (400 cell, 200 cell, 100 cell or straight
pipe) will offer significant exhaust gas temperature and backpressure
drop compared over the stock downpipe. Also, the sound is more deeptone
and backfire will appear by downshifting. The power is increased by
removing the stock downpipe to a HP downpipe round about 8-9% over
stock. Back pressure reduces around 0,45 bar on stage 2 cars up to 1 bar
on stage 3 cars. Any
change on catalysators (replacing, changing cells or size - different
than stock) requires software tuning of the engine control unit. Our
TÜV catalysators do not come with TÜV documentations. They just fit the
requirements to be legalized in combination with our software and
hardware. We can approve them in combination with further hardware &
software modifications in house.
The
3,5" 90mm catback exhaust system is designed to handle power levels
around 900HP and also offer a great sound, without having negative drone
effects in the car. The system comes with a twin 2,75" 70mm pipe
diameter, that goes into single 3,5" 90mm. At the smallest section the
system offers a 3,5" 90mm diameter, which allows to handle 900HP. It is a
plug and play exchange to the stock system, using the stock electric
valve. Therefore the system can be controlled by the stock AUDI MMI /
Dashboad switches (dynamique / comfort / individual) / auto). The
exhaust system can be configured with or without middle silencer. If you
choose the "street" option you have the middle silencers, and the
system is street legal. The version without middle silencer "race"
version does sound more brutal, but has no more homologation.
Please Note:
Any of our items are not deisgned for beeing used street legal.
Products that are street legal are marked as such.
The offered items are for racing application only and must be installed by professional workshops with
corresponding know how. If you want to install the parts on your own,
please inform yourself up front, if you are able to handle the
installation. You can also ask our technicans on the phone. We cannot
take back items that have been incorrectly installed.
Engine version: | RS3 - CZGB |
---|---|
Manufacturer: | HPerformance |
Model: | RS3 8V1 (2015-2016) |