Finally! Our 4 inch 101,6mm exhaust system is available! Ordes can be placed.Finally! Our 4 inch 101,6mm exhaust system is available! Ordes can be placed.
Product description:
Water-methanol injections (also alcohol) are used to
support intercooling and to improve fuel quality. The systems inject the
mixture through a nozzle depending on the boost pressure (programmable). This
is installed in the boost pressure system before or after the intercooler. The
methanol / alcohol that is injected over it also improves knock resistance
enormously. Fuels with a low octane number can thus be improved in terms of
knock resistance. Thus, the engine is relieved in two ways (thermal and
anti-knock). In addition, the fuel system can be relieved somewhat with the
system in the 2.5 TFSI steel engines. The HPerformance water-methanol tank has
a capacity of 11L. It is installed and fixed in all vehicles in the trunk
(invisible) under the trunk floor. Due to its 9 chambers, the sponges and the
suction pipe installed in reverse, a constant supply is still guaranteed even
with strong acceleration or cornering.
Please Note:
Any of our items are not deisgned for beeing used street legal.
Products that are street legal are marked as such.
The offered items are for racing application only and must be installed by professional workshops with
corresponding know how. If you want to install the parts on your own,
please inform yourself up front, if you are able to handle the
installation. You can also ask our technicans on the phone. We cannot
take back items that have been incorrectly installed.
Product description:
The HPerformance 3,14“ / 80mm boostpipekit is the key to optimize your
charge cooling system massively. The big outlet diameter on the
intercooler side reduces the backpressure and improves the airflow. The
system can be adapted to stock intercooler (competitor with stock
outlet diameter and position) and the HP Sport- and Race Series
intercoolers. Also another weak point of the stock charge cooling
system, the electrical blow off, is replaced by a reliable mechanical
Tial or Turbosmart blow off, that can resist any pressure in the system.
We advise to use this kit latest case at stage 3 power levels wit
upgraded turbocharges, like the 870XT.
Please Note:
Any of our items are not deisgned for beeing used street legal.
Products that are street legal are marked as such.
The offered items are for racing application only and must be installed by professional workshops with
corresponding know how. If you want to install the parts on your own,
please inform yourself up front, if you are able to handle the
installation. You can also ask our technicans on the phone. We cannot
take back items that have been incorrectly installed.
Product
description:
This package contains the RACE SERIES intercooler, the 5 inch 125mm open intake system and the 3,14 inch 80mm charge pipe and billet throttle body elbow. The intake system improves the flow on the cold side of the turbo (intake side) and the intercooler does a significant drop in charge air temperature. On the 3,14 inch 80mm outlet side of the intercooler, the charge pipe and throttle body continue this huge diameter up to the inlet manifold. Vehicles, that run more than 2 bar / 29 psi over time doe benefit significant by the pressure drop improvement due to the big size of the outlet and charge pipe of the intercooler. Also, the stock electrical blow off is not designed for these boost / power levels. This is why we add a mechanical TIAL / TURBOSMART blow off valve that also generates a pleasant blow off sound when releasing the gas pedal.The kit does not only means a significant improvement in the intake air temperature,
but also the improved fresh air supply through the intake in conjunction with
the associated turbo inlet. The intercooler's cooling performance is
dimensioned so that it can cool every conceivable performance on the 2.5 TFSI
up to 1100HP without hesitation or constantly. The intake is also designed for
outputs of up to 1000HP.
The combination achieves a performance increase of up to 40HP and 90NM (reproducible) on a standard vehicle
For further technical information, please see the
descriptions of the individual items.
Important:Please always have work on vehicles carried out by trained specialist
personnel. Bumpers of modern vehicles have various sensors and controls that
can cause problems if handled improperly. We do not provide any
guarantee/guarantee/advice for improper installations.Please note:In accordance with our general terms and conditions, we would like to
expressly point out again at this point that all items that are not expressly
marked with a TÜV / EC approval do not have approval in the area of the StVO.
These items must therefore be typed individually by the user before they are
used on public roads. Otherwise, these products must be used in racing.
Product
description:
The RACE Series intercooler & 125mm open intake
package not only means a significant improvement in the intake air temperature,
but also the improved fresh air supply through the intake in conjunction with
the associated turbo inlet. The intercooler's cooling performance is
dimensioned so that it can cool every conceivable performance on the 2.5 TFSI
up to 1100HP without hesitation or constantly. The intake is also designed for
outputs of up to 1000HP.
The combination achieves a performance increase of up to
35HP and 80NM (reproducible) on a standard vehicle
For further technical information, please see the
descriptions of the individual items.
Important:Please always have work on vehicles carried out by trained specialist
personnel. Bumpers of modern vehicles have various sensors and controls that
can cause problems if handled improperly. We do not provide any
guarantee/guarantee/advice for improper installations.Please note:In accordance with our general terms and conditions, we would like to
expressly point out again at this point that all items that are not expressly
marked with a TÜV / EC approval do not have approval in the area of the StVO.
These items must therefore be typed individually by the user before they are
used on public roads. Otherwise, these products must be used in racing.
Product
description:
The Sport Series intercooler & 125mm open intake
package not only means a significant improvement in the intake air temperature,
but also the improved fresh air supply through the intake in conjunction with
the associated turbo inlet. The intercooler's cooling performance is
dimensioned so that it can cool every conceivable performance on the 2.5 TFSI
up to 900HP without hesitation or constantly. The intake is also designed for
outputs of up to 1000HP.
The combination achieves a performance increase of up to
30HP and 70NM (reproducible) on a standard vehicle
For further technical information, please see the
descriptions of the individual items.
Important:Please always have work on vehicles carried out by trained specialist
personnel. Bumpers of modern vehicles have various sensors and controls that
can cause problems if handled improperly. We do not provide any
guarantee/guarantee/advice for improper installations.Please note:In accordance with our general terms and conditions, we would like to
expressly point out again at this point that all items that are not expressly
marked with a TÜV / EC approval do not have approval in the area of the StVO.
These items must therefore be typed individually by the user before they are
used on public roads. Otherwise, these products must be used in racing.
Product
description:
The HPerformance Sport Series intercooler for the RS3 TTRS DAZ DNW CZG represents a
massive upgrade over the stock intercooler. It offers a 179% larger charge
air volume, 99% more inflow surface and a "bar and plate" core that is superior to any performance and with over 1100hp cooling capacity is
rated. This means that the cooling performance of the HPerformance RS3 TTRS RACE SERIES intercooler exceeds that of the stock cooler many times over. The stock intercooler allows measurements on the test bench in fourth gear and heats up
by an average of 20°C from the beginning to the end of the measurement run.
Already in the second measurement, the performance drops by more than 10 HP as
a result of an intake air temperature that quickly exceeds 45°C and leads to
enrichment or component protection mode in the control unit. As a result, the
mixture becomes extremely rich, fuel consumption increases immensely and
performance also drops. Not so with our intercooler!On the stock vehicle, our intercooler leads to an increase in
performance of up to 30HP and 74NM (reproducible), even after
several measurement runs, the performance to be measured is constantly above
400HP and the temperature at the end of a run is still below that at the start.
The intercooler is suitable for all performance levels and can be used both
on the stock vehicle and on a vehicle with significantly increased
performance.
Its total weight including the impact beam is only 18,9 kg. It also offers
the option of being combined with our 80mm / 3.14 inch chargepipe / throttle
valve unit. Efficiency can also be further improved with the optionally
available air duct.
No parts need to be cut to install the cooler, but plastic panels and
corresponding foam pads do need to be unscrewed.
Important:Please always have work on vehicles carried out by trained specialist
personnel. Bumpers of modern vehicles have various sensors and controls that
can cause problems if handled improperly. We do not provide any
guarantee/guarantee/advice for improper installations.Please note:In accordance with our general terms and conditions, we would like to
expressly point out again at this point that all items that are not expressly
marked with a TÜV / EC approval do not have approval in the area of the StVO.
These items must therefore be typed individually by the user before they are
used on public roads. Otherwise, these products must be used in racing.
Product description:The HPerformance Sport Series intercooler for the RS3 TTRS CZGB DAZA DNWA represents a massive upgrade over the stock intercooler. It offers a 125% larger charge air volume, 81% more inflow surface and a "bar and plate" core that is superior to any performance and with over 900hp cooling capacity is rated. This means that the cooling performance of the HPerformance RS3 TTRS intercooler exceeds that of the stock cooler many times over. The stock intercooler allows measurements on the test bench in fourth gear and heats up by an average of 20°C from the beginning to the end of the measurement run. Already in the second measurement, the performance drops by more than 10 HP as a result of an intake air temperature that quickly exceeds 45°C and leads to enrichment or component protection mode in the control unit. As a result, the mixture becomes extremely rich, fuel consumption increases immensely and performance also drops. Not so with our intercooler!On the stock vehicle, our intercooler leads to an increase in performance of up to 20HP and 51NM (reproducible), even after several measurement runs, the performance to be measured is constantly above 400HP and the temperature at the end of a run is still below that at the start.The intercooler is suitable for all performance levels and can be used both on the stock vehicle and on a vehicle with significantly increased performance.Its total weight including the impact beam is only 16.6 kg. It also offers the option of being combined with our 80mm / 3.14 inch chargepipe / throttle valve unit. Efficiency can also be further improved with the optionally available air duct.No parts need to be cut to install the cooler, but plastic panels and corresponding foam pads do need to be unscrewed.Important:Please always have work on vehicles carried out by trained specialist personnel. Bumpers of modern vehicles have various sensors and controls that can cause problems if handled improperly. We do not provide any guarantee/guarantee/advice for improper installations.Please note:In accordance with our general terms and conditions, we would like to expressly point out again at this point that all items that are not expressly marked with a TÜV / EC approval do not have approval in the area of the StVO. These items must therefore be typed individually by the user before they are used on public roads. Otherwise, these products must be used in racing.