Upgrade low pressure injectors + wiring harness - DAZA DNWA 2.5 TFSI EVO EA855 EV980
Availability for pickups could not be loaded
- High impedance
- Suitable for gasoline and E85
- 980 cm³/min = 670 g/min = 89 lb/h at approx. 3 bar
- Excellent response properties
- 7-point multi-hole
- Injectors based on BOSCH EV14
- Precisely cut atomizer
- 1x set of 5 injection nozzles
- Injector wiring harness
Product description:
The low-pressure injection nozzle kit is used as soon as the TTRS / RS3 / RS Q3 is aiming for an output of over 600 hp. The original fuel supply becomes unstable in this range, the high-pressure injection system can support or compensate for the additional power up to a certain range, but this acts as an additional load on the rail pressure of the system. With the EV14 BOSCH 980cc (also called 1000cc) injectors offered here, the fuel system is stabilized for both normal petrol and alcohol fuels. Performance of up to 1000 hp is thus possible in combination. The fuel injectors are matched in-house and are supplied either with the short adapter plugs or optionally with the complete fuel injector wiring harness. If these injectors are installed, the vehicle's software must be adapted.
Please note:
In accordance with our general terms and conditions, we would like to expressly point out once again that all articles that are not expressly marked with a TÜV / EC approval do not have a license in the area of the StVo. These articles must therefore be type-approved by the user before they can be used on public roads. Otherwise, these products must be used in racing.
Unless otherwise indicated, all articles and services are racing articles without guarantee / warranty and without STVO approval.
The same applies to modifications made to the vehicle. The performance values offered are average values on ARAL 102 OKTAN fuel, which may deviate accordingly due to inferior fuel or wear on the vehicle.
No acceleration times are guaranteed. Subsequent misfueling may cause damage to the vehicle. No guarantee / warranty is assumed for this!
HPerformance does not assume any mobility warranty / costs for the duration of the conversion or any resulting delays.
Scheduled appointment periods are not binding and may vary.
All services are special and custom-made products that are excluded from the statutory right of return.
No warranty is assumed for products that are not installed in a specialist workshop by trained specialist personnel.
Work on motor vehicles may only be carried out by trained specialists. In addition to product malfunctions, installation errors can also lead to dangerous technical and possibly legal consequences on the vehicle.
Therefore, please have all conversions carried out by a specialist vehicle workshop of the guild.
If no instructions for installing a product are available for download in the online store, these are not available
- No installation advice / installation instructions are provided by telephone.
If vehicles have already been modified beforehand, additional costs may be incurred.
With all exhaust system components, discoloration occurs on the silencers, pipe and tailpipe during operation. These are material-related changes that are not covered by the warranty/guarantee of the item and have no negative effect on the use or technical properties of the item.
