1300PS+ low-pressure fuel pump - for alcohol, methanol and road fuels
Availability for pickups could not be loaded
- Fuel supply up to over 1300 hp on 100% alcohol
- Two outlets for an additional fuel line
- Maximum fuel pressure 8 bar / 136 PSI (regulated with overflow valve)
- Brushless auxiliary pump, non-return valve installed
- Suitable for alcohol, methanol and road fuel
- Auxiliary pump activated by boost pressure-dependent control
- Preset control
- Plug & Play wiring harness
- 1 x HPerformance upgrade fuel pump
- Vehicle-specific wiring harness (please select vehicle model)
- Installation instructions
Product description:
The HPerformance 1300HP+ Twin-Line low-pressure fuel pump is based on a brand new AUDI pump. In addition, a secondary brushless pump is combined with the system. This secondary pump is activated by a pressure switch via boost pressure and can be set to start at any boost level between 1 and 3.5 bar / 17 and 50 PSI. This helps to keep the fuel temperature low as the pump does not have to pump the fuel into the circuit when it is not needed. The maximum fuel pressure is 8 bar / 136 PSI to protect injectors and seals. The pump can pump gasoline as well as alcohol or methanol blended fuels. The pump is supplied with a fully plug-and-play wiring harness to fit your TTRS / RS3. The scope of delivery also includes installation instructions (download).
In contrast to the 1000PS version, this variant has a double output, which enables the connection of a second, original AUDI fuel line and can therefore easily cover any power level up to 1300PS.
Please note:
In accordance with our general terms and conditions, we would like to expressly point out once again that all articles that are not expressly marked with a TÜV / EC approval do not have a license in the area of the StVo. These articles must therefore be type-approved by the user before they can be used on public roads. Otherwise, these products must be used in racing.
| Model: | RS3 8V (2017-2018), RS3 8V (2018-2020), RS3 8Y (2021-2022), RSQ3 (2019-2020), TTRS 8S (2016-2018), TTRS 8S (2020-2023) |
|---|
Please note: In accordance with our General Terms and Conditions, we would like to expressly point out once again that all articles that are not expressly marked with a TÜV / EC approval do not have approval in the area of the StVo. These articles must therefore be type-approved by the user before they can be used on public roads. Otherwise, these products may be used in racing. This article is not permitted in the area of the StVZO and leads to the loss of the operating license and insurance cover. This modification is only for motorsport and competition purposes at closed events.
- Discoloration occurs on the silencers, pipe and tailpipe of all exhaust system components during operation. These are material-related changes that are not covered by the warranty/guarantee of the item and have no negative effect on the use or technical properties of the item.
