Availability for pickups could not be loaded
Product description:
This package is perfect for even more performance. The 3.5 inch turbo inlet makes it possible to generate an even larger airflow in front of the turbocharger inlet, which not only improves the response behavior, but also significantly increases the maximum throughput. The installation of the inlet on an original CEP CZG alone generates a power increase of 11 hp and 18 Nm. In combination with an open intake, the inlet unfolds its full performance. Then even up to 15PS and 27NM increase can be measured. The inlet is mandatory on vehicles with an upgraded turbocharger (more than 450 hp). On the TC610XT turbocharger, power outputs above 600 hp are only possible with the inlet. Thanks to the laser manufacturing technology, this inlet has a wall thickness of only 1.6 mm and has a significantly larger volume than comparable cast inlets.
The HPerformance 100mm 4" intake system is one of the largest intake systems on the market. It has a 100mm pipe diameter, which is adapted to the turbo inlet itself with a silicone reducer. The 100mm 4" intake system increases visible power over a 90mm 3.5" intake system and should be used in any vehicle with more than 500hp/600NM. The system has a well designed bracket to prevent any contact in the engine bay. By using aluminum, it has good heat exchange and is very lightweight. It has no negative side/risk effects such as carbon systems in terms of melting, fading/bleaching and deformation. In addition, aluminum has very good heat exchange functions, so that a hot intake manifold becomes cold again extremely quickly after the engine is switched off. It does not store heat.
Current estimated delivery time: 3-4 working days
| Manufacturer: | HPerformance |
|---|---|
| Model: | TTRS 8J (2009-2014) CEP |
Unless otherwise indicated, all articles and services are racing articles without guarantee / warranty and without STVO approval.
The same applies to modifications made to the vehicle. The performance figures provided are averages based on ARAL 102 OCTANE fuel; they may vary depending on the use of lower-quality fuel or wear and tear on the vehicle.
No acceleration times are guaranteed. Using the wrong type of fuel at a later date may cause damage to the vehicle. No warranty or guarantee is provided for this!
HPerformance assumes no liability for mobility guarantees or costs incurred during the modification period, nor for any resulting delays.
Scheduled timeframes are not binding and may vary as needed.
All services are custom-made and one-of-a-kind products that are excluded from the statutory right of return.
No warranty is provided for products that are not installed in a specialized workshop by trained professionals.
Work on motor vehicles may only be performed by trained professionals. Installation errors can lead not only to product malfunctions but also to dangerous technical and, in some cases, legal consequences for the vehicle.
Therefore, please have all modifications performed by a certified automotive repair shop affiliated with the trade guild.
If installation instructions for a product are not available for download in the online store, they are not available.
- Installation advice or instructions are not provided over the phone.
If vehicles have been modified previously, additional costs may apply. Please note that our TÜV-approved/registrable products are not necessarily compatible with products from other manufacturers for registration purposes ! Please verify in advance whether any hardware components you have already installed—that are not from HPerformance—can be registered as TÜV-compliant when used with our products!
Discoloration occurs on the silencers, pipe and tailpipe of all exhaust system components during operation. These are material-related changes that are not covered by the warranty/guarantee of the item and have no negative effect on the use or technical properties of the item.
Do you have an account?
Log in to speed up the checkout process.
