1000PS Intercooler Network 
100% quality-checked 
Modular design for easy installation
Availability for pickups could not be loaded
The HPerformance Sport Series intercooler for the RS3/TTRS/RSQ3 DAZ DNW CZG is a massive upgrade over the standard intercooler. It offers a 125% larger charge air volume, 81% more flow surface and a "bar and plate" network that can reliably cool power outputs of up to 850 hp. As a result, the cooling capacity of the HPerformance intercooler exceeds that of the standard intercooler many times over. The standard intercooler allows a measurement on the test bench in fourth gear and heats up by an average of 20°C from the start to the end of the test run. As early as the second measurement, the power output drops by more than 10 hp as a result of the increase in intake air temperature, which quickly exceeds 45°C and leads to the control unit entering the riching or component protection mode. As a result, the mixture becomes extremely rich, fuel consumption increases immensely and performance drops at the same time.
Not so with the HPerformance SPORT SERIES intercooler!
On the standard vehicle, our intercooler already leads to a performance increase of up to 25PS and 60NM (reproducible), even after several measurement runs, the power to be measured is constantly above 400PS and the temperature at the end of a run is still below that at the start.
In order to better assess the enormous potential of the cooler, we compared it directly with a GARRETT 900 intercooler. Our Sport Series intercooler was able to show its full potential. Even after 5 runs on the test bench, the output temperature (after acceleration) was still below the input temperature (before the measurement). We were able to demonstrate this effect even more clearly on the road. The measurement results can be seen in the pictures.
The intercooler is suitable for all performance levels and can be used both on the standard vehicle and on a vehicle with significantly increased performance.
Its total weight including the impact beam is just 16.9 kg. It also offers the option of being combined with our 80mm / 3.14 inch charge pipe / throttle body unit. Efficiency can also be further improved with the optional air duct.
No parts need to be cut to install the radiator, but the plastic covers and corresponding foam pads must be unscrewed.
Important:
The Audi TTRS 8S requires reworking measures on the plastic support of the radiator core! Please always have work on vehicles carried out by trained specialists. Bumpers on modern vehicles have various sensors and controls which can lead to problems if handled incorrectly. We do not provide any guarantee / warranty / advice for improper installations. If your vehicle has an ACC front camera, in rare cases it may be necessary to have the camera trained by a specialist Audi workshop.
Current estimated delivery time: 3-4 working days
Compatible vehicles:| Model: | Audi RSQ3 F3 (2019 and later) |
|---|
Unless otherwise indicated, all articles and services are racing articles without guarantee / warranty and without STVO approval.
The same applies to modifications made to the vehicle. The performance figures provided are averages based on ARAL 102 OCTANE fuel; they may vary depending on the use of lower-quality fuel or wear and tear on the vehicle.
No acceleration times are guaranteed. Using the wrong type of fuel at a later date may cause damage to the vehicle. No warranty or guarantee is provided for this!
HPerformance assumes no liability for mobility guarantees or costs incurred during the modification period, nor for any resulting delays.
Scheduled timeframes are not binding and may vary as needed.
All services are custom-made and one-of-a-kind products that are excluded from the statutory right of return.
No warranty is provided for products that are not installed in a specialized workshop by trained professionals.
Work on motor vehicles may only be performed by trained professionals. Installation errors can lead not only to product malfunctions but also to dangerous technical and, in some cases, legal consequences for the vehicle.
Therefore, please have all modifications performed by a certified automotive repair shop affiliated with the trade guild.
If installation instructions for a product are not available for download in the online store, they are not available.
- Installation advice or instructions are not provided over the phone.
If vehicles have been modified previously, additional costs may apply. Please note that our TÜV-approved/registrable products are not necessarily compatible with products from other manufacturers for registration purposes ! Please verify in advance whether any hardware components you have already installed—that are not from HPerformance—can be registered as TÜV-compliant when used with our products!
Discoloration occurs on the silencers, pipe and tailpipe of all exhaust system components during operation. These are material-related changes that are not covered by the warranty/guarantee of the item and have no negative effect on the use or technical properties of the item.
Do you have an account?
Log in to speed up the checkout process.
