
- To reinforce all 400PS 2.5 TFSI engines
- Ideal for frequent drivers with standard performance and performance-enhanced vehicles
- Eliminates the design-related weak point caused by the missing bearing bush/bearing in the standard connecting rod
- Designed for all outputs up to 800 hp and 900 Nm with conventional petrol station fuel
- All components required to complete a motor are supplied
- All gaskets, screws and sealants are genuine AUDI spare parts, no aftermarket or accessories
-
HP connecting rods HRC 41 for standard pistons 23 mm piston pin 5 x
- ACL connecting rod bearing 10 x 4B1606H
- Cylinder head gasket 1 x 07K103383 AF / 07K103383 AB
- Exhaust manifold gasket, five-ply 1 x 07K253039 F
- Exhaust manifold screws 6 x 057131529 G
- Intake manifold gasket, lower part 1 x 07K133379 G
- Intake manifold gasket upper part 1 x 07K133379
- Oil return seal 1 x 06F 145 757 L
- Injection nozzle seals 5 x 06G998907
- Liquid sealant 1 x D 176 501 A1
- Crankshaft housing sealing flange 1 x 07K103151 M
- Cylinder head expansion bolts 12 x WHT007848 D
Product description:
The HPerformance Engine Pack 1 is a simple solution to prepare all 400hp 2.5 TFSI engines for power outputs up to 800hp and 900NM and at the same time eliminates the design-related weak point of the standard connecting rod. The standard connecting rod comes without a bearing / bushing in the connecting rod eye, which means that the piston pin generates abrasion and wear in the long term. In the worst case, this leads to the pin jamming, the connecting rod tearing off and a hole being created in the engine block. The main components are the special HPerformance connecting rods which, in addition to their reinforcing effect, also reduce the compression ratio to 9.7:1. This reduces the "knocking tendency" of the combustion and the car can achieve higher performance with petrol station fuel. The standard pistons are still used due to their positive characteristics (cooling, noise, oil consumption, etc.).
If your original pistons are defective or damaged, you can also purchase the Engine Pack 1 with new pistons, piston rings and piston pins.
Please note:
In accordance with our General Terms and Conditions, we would like to expressly point out once again that all items that are not expressly marked with a TÜV / EC approval do not have approval in the area of the StVo. These articles must therefore be type-approved by the user before they can be used on public roads. Otherwise, these products may be used in racing.Model: | RS3 8V (2017-2018), RS3 8V (2018-2020), RS3 8Y (2021-2022), RS Q3 (2019-2020), TTRS 8S (2016-2018), TTRS 8S (2020-2023) |
---|
Please note: In accordance with our General Terms and Conditions, we would like to expressly point out once again that all articles that are not expressly marked with a TÜV / EC approval do not have approval in the area of the StVo. These articles must therefore be type-approved by the user before they can be used on public roads. Otherwise, these products may be used in racing. This article is not permitted in the area of the StVZO and leads to the loss of the operating license and insurance cover. This modification is only for motorsport and competition purposes at closed events.
- Discoloration occurs on the silencers, pipe and tailpipe of all exhaust system components during operation. These are material-related changes that are not covered by the warranty/guarantee of the item and have no negative effect on the use or technical properties of the item.