Availability for pickups could not be loaded
Product description:
Power is transmitted from the engine to the gearbox via the flywheel. This is bolted to the crankshaft (on the engine side) and is connected to the gearbox via a shaft (plugged in on the gearbox side). This bolted plug-in system is connected by means of a ring. As soon as the vehicle's performance is increased, or in the case of high mileage and the associated material fatigue, this ring breaks quickly. As soon as it is broken, the sound level changes and the flywheel gets more and more "play" (unwanted movement) which, in the worst case, can lead to damage to the gearbox / gearbox housing.
The reinforced dual mass flywheel from HPerformance has solved this problem. The weakly designed connecting ring is replaced by a milled carbide ring and bolted in place. This means that unwanted signs of wear can no longer occur. The reinforcement is only available as a set with a new AUDI flywheel, as used flywheels with a broken rim will fail and then exhibit too much unwanted tilting play even with the reinforcement.
We recommend the reinforcement for all vehicles with an output of 600 hp and more than 700 Nm.
Please note:
The installation of reinforced clutch or flywheel components can lead to increased noise in the drivetrain / transmission. These noises result from the reinforcement itself and do not constitute a defect/warranty reason.
Unless otherwise indicated, all articles and services are racing articles without guarantee / warranty and without STVO approval.
The same applies to modifications made to the vehicle. The performance figures provided are averages based on ARAL 102 OCTANE fuel; they may vary depending on the use of lower-quality fuel or wear and tear on the vehicle.
No acceleration times are guaranteed. Using the wrong type of fuel at a later date may cause damage to the vehicle. No warranty or guarantee is provided for this!
HPerformance assumes no liability for mobility guarantees or costs incurred during the modification period, nor for any resulting delays.
Scheduled timeframes are not binding and may vary as needed.
All services are custom-made and one-of-a-kind products that are excluded from the statutory right of return.
No warranty is provided for products that are not installed in a specialized workshop by trained professionals.
Work on motor vehicles may only be performed by trained professionals. Installation errors can lead not only to product malfunctions but also to dangerous technical and, in some cases, legal consequences for the vehicle.
Therefore, please have all modifications performed by a certified automotive repair shop affiliated with the trade guild.
If installation instructions for a product are not available for download in the online store, they are not available.
- Installation advice or instructions are not provided over the phone.
If vehicles have been modified previously, additional costs may apply. Please note that our TÜV-approved/registrable products are not necessarily compatible with products from other manufacturers for registration purposes ! Please verify in advance whether any hardware components you have already installed—that are not from HPerformance—can be registered as TÜV-compliant when used with our products!
Discoloration occurs on the silencers, pipe and tailpipe of all exhaust system components during operation. These are material-related changes that are not covered by the warranty/guarantee of the item and have no negative effect on the use or technical properties of the item.
Do you have an account?
Log in to speed up the checkout process.
