4" 100mm OEM+ closed intake - 2.5 TFSI TTRS RS3 RSQ3 VZ5- DAZ DNW
Availability for pickups could not be loaded
- Fits on original air filter box
- Fits original turbo inlet due to silicone hose reduction
- Clearly recognizable additional power of 10PS and 15NM in direct 1:1 comparison with the original intake
-
1 x intake pipe 4" 100mm (Carbon or aluminum, please select)
- 1x 100mm aluminum air filter box connection
- 1 x 80<100mm Silikonschlauchverbindung (Original Inlet auf Ansaugrohr) exzentrisch
- 4 x stainless steel hose clamps
- 1x connector hose
- 1x performance air filter (optionally selectable)
Product description:
The closed HPerformance 4" 100mm intake system is finally here. It can be used together with the original air box. This variant can be fitted directly to the original turbo inlet More intake air without the loud intake noise of an open intake. Our OEM+ intake system increases the visible performance compared to the standard intake system and should be used in every vehicle with more than 490 hp. We have reinforced the carbon tube with aluminum at the ends to prevent breakage when tightening the clamps. The whole thing is painted with a special heat-resistant paint.
| Model: | RS3 8V (2017-2018), RS3 8V (2018-2020), RS3 8Y (2021-2022), RS Q3 (2019-2020), TTRS 8S (2016-2018), TTRS 8S (2020-2023) |
|---|
Unless otherwise indicated, all articles and services are racing articles without guarantee / warranty and without STVO approval.
The same applies to modifications made to the vehicle. The performance values offered are average values on ARAL 102 OKTAN fuel, which may deviate accordingly due to inferior fuel or wear on the vehicle.
No acceleration times are guaranteed. Subsequent misfueling may cause damage to the vehicle. No guarantee / warranty is assumed for this!
HPerformance does not assume any mobility warranty / costs for the duration of the conversion or any resulting delays.
Scheduled appointment periods are not binding and may vary.
All services are special and custom-made products that are excluded from the statutory right of return.
No warranty is assumed for products that are not installed in a specialist workshop by trained specialist personnel.
Work on motor vehicles may only be carried out by trained specialists. In addition to product malfunctions, installation errors can also lead to dangerous technical and possibly legal consequences on the vehicle.
Therefore, please have all conversions carried out by a specialist vehicle workshop of the guild.
If no instructions for installing a product are available for download in the online store, these are not available
- No installation advice / installation instructions are provided by telephone.
If vehicles have already been modified beforehand, additional costs may be incurred.
With all exhaust system components, discoloration occurs on the silencers, pipe and tailpipe during operation. These are material-related changes that are not covered by the warranty/guarantee of the item and have no negative effect on the use or technical properties of the item.
Closed intake
Aluminum vs. carbon look
