After long CAD development based on 3D scans of the OEM subframe, tests with CAD FEA (finite element method) and practical tests, you can now buy branded subframes for the front of your Audi/VW/SEAT/Skoda based on the PQ35 platform. The vehicle list can be found below.
By using the same T45 tubes as in WRC vehicles, our subframes offer increased rigidity and weight reduction. All factory parts are bolted to this unit, no further modifications are required.
Advantages:
- 6 kg (13 lbs), which is 4 kg (8.8 lbs) less than the OEM subframe. That's a 40% savings!
- Second, higher control arm mounts to correct suspension kinematics for use with our tubular control arms.
- Single subframe mounting position prevents subframe from sliding under the vehicle. No subframe locking kit/deadset collar kit required (weight saving).
- Increased chassis stiffness for improved handling. No additional lower link brace required (weight saving)
- Polyurethane sway bar mount significantly reduces the forward and backward pitching of the engine, which is important for sporty driving. No additional sway bar insert or aftermarket bracket required.
Features:
- Better access to the underbody and wishbone replacement without removing the subframe.
- T45 (BS4T45 to BS4T100) UK tubing and S355 sheet metal.
- All components TIG welded.
- Supplied painted black (powder coated) or any RAL color on special order (50 Euro).
- Can be used with OEM sway bars.
- Mounts to OEM bodywork, no further subframe modifications required.
- Includes two xenon headlight brackets.
- Can be used with OEM underbody.
- Can be used with OEM or aftermarket sway bar brackets.
Scope of delivery:
- Front subframe with black-painted polyurethane pivot bracket.
- Printed installation instructions.
Used in vehicles of the PQ35 platform (type numbers in brackets):
Audi A3/S3 Mk2 (8P) (2004-2013)
Audi RS3 (8P) (2011-2013)
Volkswagen Golf Mk5 (1K) (2003-2007) / Gti / R32
Volkswagen Golf Mk6 (5K) (2008-2014) / GTI / R32
Volkswagen Scirocco (13) (2009-2017)
Volkswagen Jetta Mk5 (2005-2010)
Volkswagen Jetta Mk6 (1K) (2010-2018)
Volkswagen Touran (1T) (2003-2015)
Volkswagen Caddy (2K) (2004-2017)
SEAT Altea (5P) (2007-2015)
Skoda Octavia Mk2 (1Z) (2004-2013)
Volkswagen Golf Plus (5M) (2008-2014)
SEAT Toledo Mk3 (5P) (2005-2009)
Volkswagen Jetta Mk5 (1K) (2006-2011)
SEAT León Mk2 (1P) (2006-2013)
Skoda Yeti (5L) (2010-2013)
Skoda Superb (2008-2013)
Volkswagen Beetle (A5) (16) (2012-2017)
Volkswagen Eos (2009-2016)
The subframe is now available for both left-hand and right-hand drive vehicles!
T45 is a unique seamless carbon-based steel tube that is used in many applications in various industries. It is more robust than Co-Mo 4130 tubing, which is also used in motorsport. It is often used in aerospace for equipment such as pilot and crew seats as it can withstand high G-forces without breaking or splintering. The material is carbon-manganese based and meets the full aerospace specifications of British Standards.
Properties:
Tensile strength: 700-900 MPa,
0.2 % yield strength: at least 620 MPa
Hardness test: 201 min.-262 max. HB or 210 min.-275 max. HV.
Replaced:
- 1K0199313AL / 1K0 199 313AL
Note:
Only available for off-road, racetrack and racing applications. Fitting this product will result in additional noise, vibration and roughness being transmitted into the cabin. We strongly recommend that the subframe is fitted in a qualified and experienced workshop.
You must use a newer Gen3 steering rack. See illustration below. The old steering rack was installed in some vehicles before 2008. It is possible to replace the old steering rack with a new one. The Gen3 steering rack requires wiring harness 1K2 971 111 AJ when installed in a vehicle with a Gen1 or Gen2 steering rack. Here you will find three links that may be helpful for the replacement: LINK1, LINK2 and LINK3. It is the customer's responsibility to check whether the modification is possible in the workshop where they wish to fit the subframe before purchasing.

Unless otherwise indicated, all articles and services are racing articles without guarantee / warranty and without STVO approval.
The same applies to modifications made to the vehicle. The performance values offered are average values on ARAL 102 OKTAN fuel, which may deviate accordingly due to inferior fuel or wear on the vehicle.
No acceleration times are guaranteed. Subsequent misfueling may cause damage to the vehicle. No guarantee / warranty is assumed for this!
HPerformance does not assume any mobility warranty / costs for the duration of the conversion or any resulting delays.
Scheduled appointment periods are not binding and may vary.
All services are special and custom-made products that are excluded from the statutory right of return.
No warranty is assumed for products that are not installed in a specialist workshop by trained specialist personnel.
Work on motor vehicles may only be carried out by trained specialists. In addition to product malfunctions, installation errors can also lead to dangerous technical and possibly legal consequences for the vehicle.
Therefore, please have all conversions carried out by a specialist vehicle workshop of the guild.
If no instructions for installing a product are available for download in the online store, these are not available
- No installation advice / installation instructions are provided by telephone.
If vehicles have already been modified beforehand, additional costs may be incurred. Please note that our TÜV-approved/registrable products are not necessarily compatible with products from other manufacturers ! Please check in advance whether your already installed hardware parts, which are not from HPerformance, are TÜV-compliant with our products!
Discoloration occurs on the silencers, pipe and tailpipe of all exhaust system components during operation. These are material-related changes that are not covered by the warranty/guarantee of the item and have no negative effect on the use or technical properties of the item.