DQ500 reinforced dual mass flywheel - 2.5 TFSI Audi RS3, TTRS, RSQ3, Cupra VZ5
Availability for pickups could not be loaded
- Recommended from 700NM
- Milled carbide rim
- Original new Flywheel
- Milled Carbide rim
- Screws
Product description:
Power is transmitted from the engine to the gearbox via the flywheel. This is bolted to the crankshaft (on the engine side) and is connected to the gearbox via a shaft (plugged in on the gearbox side). This bolted plug-in system is connected by means of a ring. As soon as the vehicle's performance is increased, or in the case of high mileage and the associated material fatigue, this ring breaks quickly. As soon as it is broken, the sound level changes and the flywheel gets more and more "play" (unwanted movement) which, in the worst case, can lead to damage to the gearbox / gearbox housing.
The reinforced dual mass flywheel from HPerformance has solved this problem. The weakly designed connecting ring is replaced by a milled carbide ring and bolted in place. This means that unwanted signs of wear can no longer occur. The reinforcement is only available as a set with a new AUDI flywheel, as used flywheels with a broken rim will fail and then exhibit too much unwanted tilting play even with the reinforcement.
We recommend the reinforcement for all vehicles with an output of 600 hp and more than 700 Nm.
Please note:
The installation of reinforced clutch or flywheel components can lead to increased noise in the drivetrain / transmission. These noises result from the reinforcement itself and do not constitute a defect/warranty reason.
Unless otherwise indicated, all articles and services are racing articles without guarantee / warranty and without STVO approval.
The same applies to modifications made to the vehicle. The performance values offered are average values on ARAL 102 OKTAN fuel, which may deviate accordingly due to inferior fuel or wear on the vehicle.
No acceleration times are guaranteed. Subsequent misfueling may cause damage to the vehicle. No guarantee / warranty is assumed for this!
HPerformance does not assume any mobility warranty / costs for the duration of the conversion or any resulting delays.
Scheduled appointment periods are not binding and may vary.
All services are special and custom-made products that are excluded from the statutory right of return.
No warranty is assumed for products that are not installed in a specialist workshop by trained specialist personnel.
Work on motor vehicles may only be carried out by trained specialists. In addition to product malfunctions, installation errors can also lead to dangerous technical and possibly legal consequences on the vehicle.
Therefore, please have all conversions carried out by a specialist vehicle workshop of the guild.
If no instructions for installing a product are available for download in the online store, these are not available
- No installation advice / installation instructions are provided by telephone.
If vehicles have already been modified beforehand, additional costs may be incurred.
With all exhaust system components, discoloration occurs on the silencers, pipe and tailpipe during operation. These are material-related changes that are not covered by the warranty/guarantee of the item and have no negative effect on the use or technical properties of the item.
