Adjustable front tubular wishbones MQB Audi RS3 S3 A3 8V Golf Mk7 Seat Leon 5F
Availability for pickups could not be loaded
When used on the racetrack, the cornering forces bend the rubber in the wishbones. This changes the desired vehicle geometry, which was set on the wheel alignment system. This can lead to slower track times and poor tire utilization.
This is why we developed our control arms. Our racing wishbones use metal-to-metal uniball bearings, just like the Porsche RS series (GT2RS, GT3RS). Extensively tested on our Audi TTRS.
We use the same T45 tubes as in WRC vehicles. Our control arms offer increased stiffness and additional adjustment options. All factory parts are bolted to this unit, no further modifications are required.
Product functions:
- Caster and camber adjustment (up to -4.5 degrees camber)
- No bending of the rubber, no loss of the set geometry during maintenance
- Compatible with OEM subframes and our tubular subframes
- Allows the wishbones to be removed without having to remove the subframe
Features:
- T45 tubes (BS4T45 to BS4T100)
- Proven Motorsport M18 uniballs (Motorsport HEAVY DUTY series from RODOBAL [Italy] with reinforced PTFE sliding layer, pre-stressed fit, forged body made of heat-treated 42CrMo4 steel for maximum load capacity. The inner ring is made of hardened, ground and chrome-plated 100Cr6 carbon steel).
- Plug-and-play ready for use with the vehicle, including xenon sensors
- Possibility to mount Audi 8V air ducts on the wishbones (air ducts not included)
Scope of delivery:
- two front wishbones (pair for one vehicle) with all mounting accessories
- four rubber dust caps to protect the Uniball bearings
- printed installation instructions
Used in vehicles (type numbers in brackets):
2012 - Audi A3/S3/RS3 (8Y, 8V and 8VFL MQB)
2015 and higher - Audi TT/TTS/TTRS (8S)
2012 - Volkswagen Golf/GTI/R (Mk7 MQB Mk8)
2012 - Seat Leon (5F MQB)
Other MQB-based models
T45 is a unique seamless carbon-based steel tube that is used in numerous applications in various industries. It is more resilient than Co-Mo 4130 tubing, which is also used in motorsport. It is often used in the aerospace industry for equipment such as pilot and crew seats as it can withstand high G-forces without breaking or splintering. The material is carbon-manganese based and meets the full aerospace specifications of British Standards.
Properties:
Tensile strength: 700-900 MPa,
0.2 % yield strength: at least 620 MPa
Hardness test: 201-262 HB or 210-275 HV.
Note:
Only available for off-road, racetrack and racing applications. The installation of this rear axle control arm kit can lead to additional transmission of noise, vibrations and roughness into the interior.
Note 2:
The brake disk spacing is reduced by approx. 2 mm compared to OEM control arms. Please note this if you are using aftermarket brakes with reduced spacing.
Replaced:
- 5Q0407151 and 5Q0407152
- 81A407151C and 81A407152C
- 8S0407151D 8J0407365 or 8J0407366
Unless otherwise indicated, all articles and services are racing articles without guarantee / warranty and without STVO approval.
The same applies to modifications made to the vehicle. The performance values offered are average values on ARAL 102 OKTAN fuel, which may deviate accordingly due to inferior fuel or wear on the vehicle.
No acceleration times are guaranteed. Subsequent misfueling may cause damage to the vehicle. No guarantee / warranty is assumed for this!
HPerformance does not assume any mobility warranty / costs for the duration of the conversion or any resulting delays.
Scheduled appointment periods are not binding and may vary.
All services are special and custom-made products that are excluded from the statutory right of return.
No warranty is assumed for products that are not installed in a specialist workshop by trained specialist personnel.
Work on motor vehicles may only be carried out by trained specialists. In addition to product malfunctions, installation errors can also lead to dangerous technical and possibly legal consequences for the vehicle.
Therefore, please have all conversions carried out by a specialist vehicle workshop of the guild.
If no instructions for installing a product are available for download in the online store, these are not available
- No installation advice / installation instructions are provided by telephone.
If vehicles have already been modified beforehand, additional costs may be incurred. Please note that our TÜV-approved/registrable products are not necessarily compatible with products from other manufacturers ! Please check in advance whether your already installed hardware parts, which are not from HPerformance, are TÜV-compliant with our products!
Discoloration occurs on the silencers, pipe and tailpipe of all exhaust system components during operation. These are material-related changes that are not covered by the warranty/guarantee of the item and have no negative effect on the use or technical properties of the item.
