Availability for pickups could not be loaded
Product description:
The HPerformance Engine Pack 1 is a simple solution to prepare all 400hp 2.5 TFSI engines for power outputs up to 800hp and 900NM and at the same time eliminates the design-related weak point of the standard connecting rod. The standard connecting rod comes without a bearing / bushing in the connecting rod eye, which means that the piston pin generates abrasion and wear in the long term. In the worst case, this leads to the pin jamming, the connecting rod tearing off and a hole being created in the engine block. The main components are the special HPerformance connecting rods which, in addition to their reinforcing effect, also reduce the compression ratio to 9.7:1. This reduces the "knocking tendency" of the combustion and the car can achieve higher performance with petrol station fuel. The standard pistons are still used due to their positive characteristics (cooling, noise, oil consumption, etc.).
If your original pistons are defective or damaged, you can also purchase the Engine Pack 1 with new pistons, piston rings and piston pins.
Please note:
In accordance with our Terms and Conditions, we would like to expressly reiterate here that all items not explicitly marked with a TÜV or EC approval do not have approval under the German Road Traffic Regulations (StVo). These items must therefore be type-approved by the user through an individual approval process before they can be used on public roads. Otherwise, these products are intended for use in racing.| Model: | RS3 8V (2017-2018), RS3 8V (2018-2020), RS3 8Y (2021-2022), RS Q3 (2019-2020), TTRS 8S (2016-2018), TTRS 8S (2020-2023) |
|---|
Unless otherwise indicated, all articles and services are racing articles without guarantee / warranty and without STVO approval.
The same applies to modifications made to the vehicle. The performance figures provided are averages based on ARAL 102 OCTANE fuel; they may vary depending on the use of lower-quality fuel or wear and tear on the vehicle.
No acceleration times are guaranteed. Using the wrong type of fuel at a later date may cause damage to the vehicle. No warranty or guarantee is provided for this!
HPerformance assumes no liability for mobility guarantees or costs incurred during the modification period, nor for any resulting delays.
Scheduled timeframes are not binding and may vary as needed.
All services are custom-made and one-of-a-kind products that are excluded from the statutory right of return.
No warranty is provided for products that are not installed in a specialized workshop by trained professionals.
Work on motor vehicles may only be performed by trained professionals. Installation errors can lead not only to product malfunctions but also to dangerous technical and, in some cases, legal consequences for the vehicle.
Therefore, please have all modifications performed by a certified automotive repair shop affiliated with the trade guild.
If installation instructions for a product are not available for download in the online store, they are not available.
- Installation advice or instructions are not provided over the phone.
If vehicles have been modified previously, additional costs may apply. Please note that our TÜV-approved/registrable products are not necessarily compatible with products from other manufacturers for registration purposes ! Please verify in advance whether any hardware components you have already installed—that are not from HPerformance—can be registered as TÜV-compliant when used with our products!
Discoloration occurs on the silencers, pipe and tailpipe of all exhaust system components during operation. These are material-related changes that are not covered by the warranty/guarantee of the item and have no negative effect on the use or technical properties of the item.
Do you have an account?
Log in to speed up the checkout process.
