Sport Series intercooler - Audi TTRS 8S Facelift OPF - DNWA
Availability for pickups could not be loaded
Product details
- Noticeable increase in performance of up to 25PS and 60NM through replacement with standard part
- Charge air volume 125% larger than in series production
- Flow surface 81% larger than in the series
- 76mm / 3 inch input and 80mm 3.14 inch output connection
- Can be combined with 80mm 3.14 inch boost pressure pipe incl. external blow-off and 80mm 3.14 inch throttle body bend
-
Efficient working range up to 3.5 bar boost pressure thanks to bar and plate network
- Suitable for all conceivable performance ranges
-
Lightweight version thanks to the latest technology - 16.1 KG
- 100% product control, pressure tested to 5 bar
Scope of delivery
- HP SPORT Series intercooler
- Parts certificate for TÜV registration
Product description:
The HPerformance Sport Series intercooler for the RS3/TTRS/RSQ3 DAZ DNW CZG is a massive upgrade over the standard intercooler. It offers a 125% larger charge air volume, 81% more flow surface and a "bar and plate" network that can reliably cool power outputs of up to 850 hp. As a result, the cooling capacity of the HPerformance intercooler exceeds that of the standard intercooler many times over. The standard intercooler allows a measurement on the test bench in fourth gear and heats up by an average of 20°C from the start to the end of the test run. As early as the second measurement, the power output drops by more than 10 hp as a result of the increase in intake air temperature, which quickly exceeds 45°C and leads to the control unit entering the riching or component protection mode. As a result, the mixture becomes extremely rich, fuel consumption increases immensely and performance drops at the same time.
Not so with the HPerformance SPORT SERIES intercooler!
On the standard vehicle, our intercooler already leads to a performance increase of up to 25PS and 60NM (reproducible), even after several measurement runs, the power to be measured is constantly above 400PS and the temperature at the end of a run is still below that at the start.
In order to better assess the enormous potential of the cooler, we compared it directly with a GARRETT 900 intercooler. Our Sport Series intercooler was able to show its full potential. Even after 5 runs on the test bench, the output temperature (after acceleration) was still below the input temperature (before the measurement). We were able to demonstrate this effect even more clearly on the road. The measurement results can be seen in the pictures.
The intercooler is suitable for all performance levels and can be used both on the standard vehicle and on a vehicle with significantly increased performance.
Its total weight including the impact beam is just 16.9 kg. It also offers the option of being combined with our 80mm / 3.14 inch charge pipe / throttle body unit. Efficiency can also be further improved with the optional air duct.
No parts need to be cut to install the radiator, but the plastic covers and corresponding foam pads must be unscrewed.
Important:
The Audi TTRS 8S requires reworking measures on the plastic support of the radiator core! Please always have work on vehicles carried out by trained specialists. Bumpers on modern vehicles have various sensors and controls which can lead to problems if handled incorrectly. We do not provide any guarantee / warranty / advice for improper installations.
Current estimated delivery time: 3-4 working days
Compatible vehicles:| Model: | Audi TTRS 8S with OPF (2020-2023) |
|---|
Unless otherwise indicated, all articles and services are racing articles without guarantee / warranty and without STVO approval.
The same applies to modifications made to the vehicle. The performance values offered are average values on ARAL 102 OKTAN fuel, which may deviate accordingly due to inferior fuel or wear on the vehicle.
No acceleration times are guaranteed. Subsequent misfueling may cause damage to the vehicle. No guarantee / warranty is assumed for this!
HPerformance does not assume any mobility warranty / costs for the duration of the conversion or any resulting delays.
Scheduled appointment periods are not binding and may vary.
All services are special and custom-made products that are excluded from the statutory right of return.
No warranty is assumed for products that are not installed in a specialist workshop by trained specialist personnel.
Work on motor vehicles may only be carried out by trained specialists. In addition to product malfunctions, installation errors can also lead to dangerous technical and possibly legal consequences on the vehicle.
Therefore, please have all conversions carried out by a specialist vehicle workshop of the guild.
If no instructions for installing a product are available for download in the online store, these are not available
- No installation advice / installation instructions are provided by telephone.
If vehicles have already been modified beforehand, additional costs may be incurred.
With all exhaust system components, discoloration occurs on the silencers, pipe and tailpipe during operation. These are material-related changes that are not covered by the warranty/guarantee of the item and have no negative effect on the use or technical properties of the item.
